|This extremely simple and sensitive tool uses the plum-bob and bevel principle to balance props both vertically and horizontally. It can be carried in a small tool box for easy use in the field and balances props accurately for smooth operation. The precision machined hub works with any prop designed with standard 1" center hole. Illustrated instructions included.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Valance whit ease makes prop maint a breeze
BUZZ MASTER PROP BALANCER W/ INSTRUCTIONS
I havent had a chance to use the balancer yet but the product arrived very fast and was exactly the way it was described.
I first used the Buzz Master in school to statically balance props and found it simple and easy to use. Actually, I found it a little too sensitive in the beginning but became more adapted at using it the more props I balanced. I now use the Buzz Master as a part of my prop balancing service. If the ips readings from my dynamic prop balance set are to too high to start with, I know I will need to begin the process by using the Buzz Master to statically balance the prop. An economical, simple but sensitive tool.
Good concept, But cheaply made -- String breaks with the slightest weight on the buzz master. Must be restrung through the slug--not an easy fix !
Im sorry to have to write this,... I was looking forward to getting My Prop balanced as soon as I could,... first of all, I have a rather Lite Prop ( Powerfin) ... and when I suspended it from the Buzz Balancer,... about a Minute of hanging the string broke,... so I tied it back,... and tried it again... about 3 mins later it broke again...Probably a weak string on this unit...??? I wasnt Mad or anything,... I heard You would make it right... but I just thought Let the buyer beware ... No hard feelings...
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The diameter of the cylinder is approximately 1".
We have added the instruction sheet to the web page as a PDF in the 'Documents' section.