The FlexAlert Multifunction Annunciator is an all-in-one multifunction display that places critical warning and condition annunciations directly in front of the pilot to increase safety and simplify panel layouts. The sunlight-readable & dimmable LED display includes Landing Gear Status for both land and seaplanes as well as warnings for Engine, Oil Pressure, Fuel Pressure, Low Fuel, Pitot Heat, Low Voltage, Over Voltage, Alternator Failure, Doors, Starter Engaged, Vacuum Failure and Autopilot Glideslope Capture. The FlexAlert Multifunction Annunciator can save you over $1,000 compared to individual or customized annunciators and the LED technology is significantly brighter and more reliable than incandescent lamps.
The unit does not include sensors for the annunciations. The FlexAlert Multifunction Annunciator is configurable out-of-the-box for both retractable and fixed-gear aircraft and can operate on 14V or 28V aircraft systems with no modifications. It is certified for installation in Part 23 aircraft as a minor alteration when used for supplemental purposes. Kit includes flush panel mounting bracket options for top/bottom supports as well as left/right supports.
I installed this in my Cardinal RG. It works well. Excellent for the price. I like having the GEAR TRANSIT and THREE GREEN gear down lights at eye level. Also the ALT OUT is a good safety feature. Engine exceedances that display on my Garmin G3X engine instruments trigger an ENGINE master warning light, alerting one to look for the problem. We had some installation issues - 2 units were defective on arrival, and one of the lights failed to display in dim (night) mode, so I rate it 4 stars.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Correct. No sensors are included with this unit. It is designed to tie into existing warning and condition lights for items such as landing gear, engine warnings, vacuum warnings, etc.