|This replacement cable has bare wires at the end so you can hard wire your Garmin G3X™ or portable directly to a GDL® 39 / 50 / 51 / 52 and DC power source. This connection allows you to send NMEA data as well as the GDL 39’s ADS-B info over the cable.|
What can you say about a cable? I used it to wire a serial connection into my Garmin G3X and provide power to the GDL 39. Worked perfectly, nice quality.
Great addition to the airplane.
Works as expected for providing ships power to the GDL-39 BUT you will also need Garmin Part Number 010-11206-15 to supply ships power to your GPSMAP 695/696. I bought this cable thinking it would supply power to both units and was disappointed to find that I would need yet another expensive cable to supply power to both units. Functional, but overpriced.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
On our GDL 39 page, there is a PDF manual in the documents tab. On page 3-5, it has the wiring information for the data cable.
This power data cable is approximately 63 inches long.
This cable is compatible with both the original GDL 39 and the newer GDL 39 3D.
Approx 65 inches from connector to end of bare wires.
Yes, this can also be used with the Garmin GDL 50 / 51 / 52 series receivers.
The GDL 51 does not display ADS-B. This cable will not accomplish what is being asked. You will need a unit capable of producing the ADS-B in signal, such as the GDL50 or the GDL 52.
No, the manufacturer does not supply the connector on its own.
Yes, this will work with the GDL 50. The connection is the same.