|Get better signals while conserving battery power with this GA™ 27C low-profile remote antenna. Runs on a lower voltage so battery drain is minimized. Two mounting options include a magnetic mount for the outside of your vehicle or vessel and a suction mount to hold the antenna in place against the inside of your windshield or window. With 8 ft (2.44 m) of cable and MCX connector. Size: 2.75" (6.99 cm) L x 2" (5.08 cm) W x 0.75" (1.91 cm) H.|
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this antenna can be used with the aera 660.
No, this is just a GPS antenna. For WAAS you can view the GA 35 p/n: 11-09701.
The difference between the GA26c and the GA27c are the connectors:
GA 26C - 8 feet of cable and BNC connector
GA27C - MCX Connection
Part # 11-00052 is the MCX connector that allows for it to connect to either unit.
The 660 can replace the 696. However, it will require a new bare wire cradle to have the same functions you currently have. For the XM receiver you will need a separate unit such as the GDL51 which connects to the 660 for XM capability.
This antenna is a GPS antenna only. No ADS-B signal will be received.