A new flush mounting system to dock and fully integrate your Apple iPhone 11 into your aircraft instrument panel with Included Fan.
Now Approved for Installation in Certified Aircraft and Rotorcraft!
The smartPanel Mount series is a new flush mounting system to easily dock and seamlessly integrate your Apple iPhone 11 into your aircraft instrument panel -- giving it a clean, professional appearance in an easy to view position! Once installed, the smartPanel mount allows your iPhone to be docked in seconds, fully connected to power and audio with built-in cable ports. Removal is just as easy -- just slide, push, and remove!
Add the convenience of all your favorite iOS aviation apps and communication on your iPhone 11 in easy reach and integrated in your new or existing panel with the smartPanel Mount for iPhone 11.
Now Approved for FAA Certified Part 23 Aircraft and Part 27 and 29 Rotorcraft All smartPanel Mounts from Guardian Avionics are approved for installation in certified aircraft and rotorcraft under 14 CFR Part 23, 27 and 29 as "Non-Required Safety Enhancing Equipment" (NORSEE) as outlined in FAA memorandum number PS-AIR-21.8-1602. Mounts and power supplies may be installed as a minor alteration. Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
Designed with General Aviation in mind.
The smartPanel Mount was designed by aerospace engineers to perform in the unique environment of the cockpit. The spring actuated mounting cradle securely holds the iPad or iPhone in place during the roughest of turbulence. The clean, flush mount has a shallow chassis allowing it to be easily installed in even the smallest of instrument panels. Built-in ports for the Apple Lightning plug and a 3.5mm audio cable help keep cables safely and securely positioned behind the panel, allowing you the ability to connect to power, data, and audio without the cord mess.
Keep it cool.
As they are being used, iPhones generate heat that can affect performance -- resulting in a high-temperature shut down when you might need it most! Pilots have found this out the hard way when using a temporary mounting solution like Velcro to attach their unit to the instrument panel. The smartPanel Mount was designed with cooling in mind. Each mount has a built-in Fan Blower (14 or 28V) capable of supplying 4.6 Cubic feet per minute of Air and because it is powered by the aircraft you will not run out of battery. Each panel mounting tray features cooling channels to circulate Fan Blower air behind your iPhone to keep it cool even under the heaviest of use.Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
The smartPanel Mount is designed for easy installation in your panel. Each durable molded ABS plastic unit is self-contained and mounts with only four screws. The installation drawings give you the exact panel cutout details and screw positions in either PDF or AutoCAD DXF for precise cuts. The smartPanel Mount for iPhone X requires a 5.477" long and 3.025" high panel cutout and can be mounted either horizontally or vertically.Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
Mount in Automobiles, Boats, RVs, and Displays Too!
Though the smartPanel Mount for iPhone 11 was designed for use in aircraft, the durable construction and well-designed flush mount can be used easily for a wide variety of applications -- wherever there is a flat surface!Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.