FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-288-8077

BendixKing xCruze 100 Digital Autopilot System For Tecnam

Select Aircraft
BravoEchoSierraP2008
Select Size
2 Inch Round Display3 Inch Round DisplayFlat Pack
Quantity
Add to Wishlist

Overview

The xCruze 100 is an affordable and flexible digital autopilot system for Tecnam Bravo, Echo, Sierra, and P2008 aircraft. The xCruze 100 provides a seamless integration with the AeroVue Touch EFIS as well as a variety of other manufacturers.

The complete system is offered at a low cost, with the choice of three form-factor variations:
  • • 2” round
  • • 3” round
  • • Flat pack
Powerful and Flexible
Emergency autopilot level button helps to bring the aircraft to a wings-level position. Connects to either hand-held GPS or IFR panel mount GPS systems. When connected to hand-held GPS, follows programmed flight plans. When connected to panel mount GPS, autopilot follows roll steering commands to fly complex flight plans Similar to lane assist in automobiles, the AEP stand-by mode monitors aircraft bank angle. Autopilot corrects the bank angles greater than 45 degrees by automatic roll command.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Standard Features

  • Bank Angle Select (if no GPS signal)
  • Track Select
  • GPS Nav (point to point type flight plans)
  • GPSS (roll steering commands)
  • Vertical Speed Select
  • Altitude Hold
  • Altitude Select
  • Altitude Pre-Select
  • GPSV (LPV Approaches)
  • Control Wheel Steering
  • Emergency Level
  • AEP (Bank Angle Protection Mode)
  • Roll Servo
  • Pitch Servo
  • Install Kit

Specifications

  • 2” Round: 2.5” H x 2.5” W x 5.5” D
  • 3” Round: 3.25” H x 3.25” W x 5.5” D
  • Flat Pack: 1.6” H x 4.3” W x 6.1” D

In The Box

Model Description Part Number Quantity
XC 0100EXP xCruze100 Autopilot Computer
(2" Round / 3" Round / or Flat Pack)
8000-164 (2")
8000-169 (3")
8000-165 (Flat Pack)
1 (Of selected unit)
KIT0100AC Flat Pack Avionics Stack Adapter Kit
(If Flat Pack Model is selected)
8200-143 1 (With Flat Pack)
KIT0100EXP Tecnam Bravo Install Kit OR
Tecnam Echo Install Kit OR
Tecnam Sierra Install Kit
8700-034 (Bravo)
8700-035 (Echo)
8700-037 (Echo)
1
XCS0100EXP xCruze 100 Basic Servo - B 8100-070 1
XCS0100EXP xCruze 100 Pitch Servo - B 8100-072 1
XC 0100EXP xCruze Operators Manual 8300-088 1

Reviews

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What changes between one model or another? the servos are the same? just change the wire kit? same as Vans aircraft. Thanks

The install and hardware kits are different for each type. The servos and control heads are the same.

Q: I have all analogic instruments on my plane. Do I need any glass instrument like G5/Gemini to pair with the AP? (For altitude, heading and vs functions)

Compatible Analog instruments can work. It does not require digital instruments.

Q: Can I use the BENDIXKING XCRUZE 100 DIGITAL AUTOPILOT SYSTEM in a Tecnam P2002 JF lights port aircraft 600 kg?

Yes, we offer a kit for experimental aircraft.

Q: i need an autopilot for tecnam p2010 mod 2016. can i use this one

Yes, this should fit the Tecnam model.