EPL0151 is a clear two-part resin/hardener which is ideal for bonding fiberglass, PVC, and graphite. Cure time is 6-8 hours. EPK1C is a white 2-part resin/hardener epoxy system which is used to bond aluminum and ceramics.
Loctite EA 1C Epoxy Kit (with Re-Usable Mixing Sheet & mixing sticks) is a two-part, off-white color highly-versatile general-purpose epoxy adhesive and sealant. It has a 25 minute working time, 24hr full cure time (cures faster with heat), works with most metals, plastics, and wood, withstands severe environmental conditions, and is sandable/machinable.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Used this Epoxy when I was @ work and it is still the best for ceramics
Aircraft Spruce is very responsive and helped me with my return. I needed high temp Hysol, so I returned it.
This epoxy is a non-flowing, slow curing fix it wonder. If epoxy is whats needed, this is it. I often used this at the major airline I worked for - it was always kept in stock and I never found an expired kit. Best price I found was right here.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
They mix in a 2.7:1 ratio.