BB-MU: Light Weight Battery Box Fit “E” Case And PC680
The light weight aluminum battery box is excellent to use with the EarthX lithium batteries for easy installation. This battery box can be used interchangeably for the EarthX Lithium Battery models ETX680/900/900-VNT/1200 or the Odyssey PC680 with the use of a foam spacers. We call it the multi-use battery box for this reason. If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
EARTHX MULTI-USE ALUMINUM BATTERY BOX
Perfect drop-in with existing bolt holes on Vans RV-7 firewall. Installation took about 15 minutes. To fit the mounting holes, the battery box is a bit wider than needed for the battery (about 1/2”), so it requires using an included spacer. I’d like a bit more robust of a battery securing strap, but the specs say it was tested to 30 G, the battery is so light, and the probability of a heavy negative G load minimizes issues.
Not a very good earthx battery box. Earthx battery is 1/2” wider so bracket ear spacers needed. A 2” bottom spacer is required. If you are mounting only an earthx don’t use this bracket!
I would not use this box on an aircraft. It is not made to an aviation quality standard.
Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, you will need P/N# 11-17403 for this battery.