The only product of its kind, AVBLEND is a unique "micro"-lubricant. AVBLEND molecules have been reformulated to be smaller than regular oil molecules. The results of this reformulation allow AVBLEND to soak deeper into the metal than any other lubricant. AVBLEND penetrates, cleans, lubricates and protects aircraft piston engines from the inside out.
AVBLEND uses your aircraft's engine oil as a carrying agent to reach metal working surfaces inside your engine. When your engine reaches operating temperature, AVBLEND soaks into the metal surfaces. Once AVBLEND has penetrated the internal components of an engine, the parts are continuously lubricated and cleaned. Continuous use of AVBLEND helps reduce future harmful carbon deposit buildup.
If you were to look at the metal in your engine through a microscope, you would see that the surface is far from smooth. You would see peaks and valleys, blunt and sharp edges. Your aircraft engine's oil moves over the surface doing its best to provide lubrication. However, the oil molecules are too large to provide penetration in the small grooves and protect the entire surface of your engine. AVBLEND's depth-soaking molecules are small enough to fill in these tiny nooks and crannies and penetrate deep into the metal, thus providing better lubrication with moving pieces. Plus, AVBLEND cleans the surface from harmful deposits.
The chart, right, provides an average cost of performing a single cylinder or top overhaul repair on four and six-cylinder aircraft engines. Labor pricing is based on an average shop rate of $50.00 per hour. Costs stated below do not include tax, shipping or lost revenue while the aircraft is grounded for these repairs. Using AVBLEND at every oil change costs considerably less than a single cylinder replacement, and a fraction of more costly repairs. Not only is AVBLEND solid preventative maintenance, but it provides an added level of safety and security by reducing the chance of compression loss and the resultant decrease in horsepower.
After initial start-up, although oil pressure registers on the cockpit gauges, it can take an additional 45 to 120 seconds for oil to reach critical parts of your engine. Starting your engine is the major cause of engine wear. The piston (below left) removed at overhaul shows severe thrust side scoring which is common when AVBLEND is not used. The piston (below right) shows thrust side commonly seen at TBO using AVBLEND.
Rust and Corrosion
Most aircraft owners, quite simply, don't fly their airplanes enough. These periods of inactivity can cause irreversible rust and corrosion which can lead to premature replacement of expensive internal engine parts. The camshaft (below left) shows significant rust and corrosion damage which resulted in premature replacement. The camshaft (below right) was protected by AVBLEND and made it to TBO still within factory limits.
Carbon and Deposit Build-Up
Leaded aviation fuels combined with high operating temperatures create an environment for carbon and deposit build-up in the most critical areas of your engine. AVBLEND kept the exhaust guide (below right) virtually carbon free and dimensionally correct while the unprotected guide (below left) shows significant carbon.
Valve Stem Deposits and Wear
Carbon and deposit build-up (below left) can cause valve sticking and excessive valve stem and guide wear which can lead to catastrophic engine failure. AVBLEND (below right) can help to minimize these potentially dangerous deposits and wear.
Pour one bottle (12oz.) into the oil system. For best results, operate for 30 minutes after treatment.
Recommended retreatment schedule
Have used at every oil change in my AEIO-320. Oil analysis shows continuous decrease in wear. A must for all piston aircraft engines.
Received very well packed ! Love this product , I have been using it for years .
THE BEST ADDITIVE FOR THE ENGINE. NO STUCK EX VALVES AFTER USING THIS PRODUCT. 10 YEARS NOW.
I have been running Avblend in my last two airplanes. I will push off the oil change until I have Avblend.
I have been using AVBLEND with every oil change for many years in my 1972 Cessna 150 L model. No sticking valves and runs well. Cannot say AVBLEND has anything to do with it but itâ€™s worth the few bucks for additional insurance.
Completely cleared an intermittently sticking exhaust valve which had been plaguing me for months.
I wont fly my airplane without it. I swear by it. My engine is trouble free and I attribute it to Avblend.
At this point no real way for me to evaluate this miracle in a can as my Aero Sport 0-360 only has 260 hrs on it , but anything I can do to protect a $24,000 investment seems to be the prudent thing to do .
Fast and great service as always
Per the supplier: Yes, Avblend is the aviation FAA approved version. There is no other difference than Avblend is for aviation and Zmax is not.
Per the supplier: Yes. There is no problem using AVBLEND in the oil system and TCP in the fuel system at the same time. We DO NOT recommend other oil additives mixed with AVBLEND.
Yes, this is safe to use with 20W-50 Phillips 66 x/c.
AVBLEND is the only product of its kind approved by the FAA for aircraft piston engines. AVBLEND is a tenacious micro-lubricant with reformulated micro-molecules that penetrate, clean and protect metal from the inside out. AVBLEND soaks into the metal.
Yes. AVBLEND is FAA approved for aircraft piston engines; it is the only product of its kind to receive FAA approval.
Yes. AVBLEND is compatible with all conventional and synthetic oils.
We recommend using AVBLEND with each 25-hour oil change for best results, not to exceed 50 hours between oil change intervals, or a total of four (4) months maximum between oil change intervals, whichever comes first.
Add one (1) 12 oz. can of AVBLEND to 4 cylinder engines (4 - 8 quart oil system capacity).
Add two (2) 12 oz. cans of AVBLEND to 6 or 8 cylinder engines (9 quart or more oil system capacity).
NOTE: The Continental TSIO and IO-360 series engines have an 8 quart oil system capacity and will require only one (1) 12 oz. can of AVBLEND at each oil change interval.
AVBLEND is a progressive lubrication treatment program -- not a quick-fix, one time treatment in a can. AVBLEND treatment is recommended at each oil change interval because AVBLEND continuously soaks in and weeps from treated metal surfaces. For additional protection while your aircraft is in long-term storage, we recommend that you treat your engine with AVBLEND prior to your last flight before storing your aircraft. By properly replenishing AVBLEND, your aircraft engine will receive the necessary continuous protection between oil changes.
AVBLEND can help restore and maintain your used aircraft engine to improved performance levels -- providing protection against rust, corrosion, dry start damage and premature wear. AVBLEND's unique penetrating ability slowly dissolves carbon and helps to improve valve and ring sealing in the combustion chamber. This provides better cylinder combustion (peak pressure) efficiency resulting in improved engine horsepower. Engines must be at least dimensionally correct within service limits to restore performance.