REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077

Matco Centrifugally Cast Wheel Internal Caliper W50Ld

$982.00/Pair
Part# 06-00411
MFR Model# WHLW50LD

Overview

W50LD
MATCO mfg produces a superior 5 inch wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses 1.25 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations).

Dimensions

The W50LD is a 5 inch wheel with 4.725 inch width with an additional 1.23 inch caliper spacing. Bearing spacing is 3.084 inches and axle spacing is 1.410 inches. The total weight of this wheel and brake assembly is 8.9 pounds. The bearing axle diameter is 1.25 inches.


Performance
The W50LD is designed for the following standards:
Static Capacity: 1420 LBS
Load Limit: 4260 LBS
Maximum Accelerate/Stop Kinetic Energy: 283613 ft-lb
Torque Rating (@450 PSI): 3976 in-lb

Product Comparison Table
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.