Pilotshop.com
- Shop All Categories
- Browse Headsets
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
WESTACH 2-1/4" SQUARE CHT 100-650F 2A1 NON TSO
MFR Model# 2A1
FREE Shipping
Overview
|
Westach 2-1/4" square CHT gauge with Probe J-Wire Range: 100-700° F Made in USA |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Reviews
Works perfectly
Verified Purchase
WESTACH 2-1/4" SQUARE CHT 100-650F 2A1 NON TSO
as advertised
Verified Purchase
WESTACH 2-1/4" SQUARE CHT 100-650F 2A1 NON TSO
Works great! I initially bought the more expensive temperature compensated gauge which did not work at all. Apparently it was defective out of the box. I replaced it with this and finally have a gauge that works. Very pleased with it.
exceklent delivery time and exact product for my completion
Arrived quickly. Exactly what I ordered. ACS hits home run. The sender is not as robust as one that I would design, and over time they fall apart and get twisted into oblivion after many spark plug changes on two stroke engines. That characteristic may be unavoidable. They are relatively cheap and easy to replace.
The casting of the case is unacceptable in any case (tso or not) The back plate still has spurs from the molding process. The back plate bows in the middle between all four corners. I have not installed or run this gauge, but not expecting much. This gauge would be OK at $30-40.
Q&A
Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The Westach Cylinder Head Temperature Gauge is for use with a 48" type J"712 series thermocouple.
Per Westach, the Cylinder Head Temperature CHT Gauge does not feature temperature compensation.
No, this gauge does not include the probe. Please see the type J Westach thermocouple senders.
You connect the two via the connector kit with the unit.
This instrument is self-powered and does not require an external power input.
Yes, the probe (part number 10-01227) comes pined and ready ti connect to the back of the gauge.
Yes, this will work with 18mm standard plugs.
For use with 48" type J 712 series thermocouple.
The sender has a 4 foot lead.
No, P/N 10-01235 is not back lit.