REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077
Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1

2-1/4 UMA VSI 0-4000 FT.

$405.00/Each
Part# 10-05550
MFR Model# 8-210-40
DescriptionPart No.
2-1/4 UMA Vertical Speed Indicator
Range: ±4,000 ft/min.
10-05550

Overview

The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. This instrument is temperature compensated and is provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system.

2-1/4" Vertical Speed Indicator (Refer to Image #2)
Case: Valox 420 Plastic
Weight: 7.4 oz.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Like the other UMA instruments, this is a good value. Solid, accurate, light, easy to read. Definitely recommended.

Phill
October 7, 2019

Installation was straight forward. First flight in the Carbon Cub after installation showed 1700 feet per minute on take off. Readings matched those shown on the G3X, but seeing them on a steam gauge is a lot more fun.

Charles S
August 12, 2018

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are the UMA VSI on this page certified (TSO'd)?

No, this page is for non certified UMA VSI. If you look under UMA you will find both a certified and non certified UMA VSI page.

Q: How deep it this UMA Vertical Speed Indicator? What sort of static plug it is?

This unit is 2.80 inches deep, and this is an electric gauge therefore will require a harness.