REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077

EATON 601/AE701-3 HOSE, MED PRESS

$26.90/Foot
Part# 601-3
MFR Model# 601/AE701-3

Overview

Eaton Aeroquip Hoses.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Can you use this hose over barbed fittings with high quality standard hose clamps (worm gear)? I have all barbed fittings on my Rotax 912 ULS installation and wanted to use better than standard oil cooler line.

You should avoid using barbed fittings, especially on fuel lines. Barbed fittings tend to contaminate the hose, this can be a bad situation on your Rotax motor since there is not a filter between the pump and carburetors. As usual you should check your float bowls for contamination for the first 10-15 hours after replacing any fuel hoses. As far as if you can use worm drive clamps on Aeroquip 601 hose, no you cannot. Aeroquip 601 hose is designed to be used with 816 fittings. The best option for your Rotax motor is to use Super-Flex hose, clamped with Band-It clamps and covered with firesleeve.

Q: What size (Aeroquip 601 hose) equal size STRATOFLEX 156-3 HOSE?

The Aeroquip 601-3 is the closest size to the Stratoflex 156-3.

Q: Can this hose and the 816 fittings be used in certified aircraft?

Yes, this hose and fitting combination can be used in certified aircraft.

Q: What fittings are recommended for Aeroquip 601-3 hose? The 816 fittings seem to start at -4.

This would be use the 816-3 fitting.