REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077

Dillon Mechanical Force Gauge 50X 1/2 Lb.

$820.00/Each
Quantity
Add to Wishlist
Part# 12-03326

Overview

Model X-C comes in nine capacities ranging from 50 lb to 25,000 lb or 50 to 10000 kg. Allfeature accuracy of ±1% of full capacity, except the 25,000 (10000kg) capacity instruments which are accurate to ±2% of full capacity.

Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases. The ball is held in place with a spring clip or retainer. A threaded mounting hole is located opposite the loading ball in the bottom of the beam.

Model X-C is available in pound and kilogram capacities.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specifications

  • 50 to 250-lb capacity 0.019" (25 to 100 kg)
  • Overload rating:Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor.

Benefits

  • To reset zero, loosen knurled bezel-locking screw and rotate dial.
  • Dillon Model X Force Gauges may be mounted horizontally, vertically, or flat.
  • The baked-enamel finish resists corrosion and rust.
  • Operating temperature up to 120° F.

Reviews

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.