1-877-288-8077 | firstname.lastname@example.org
Corona, CA | Peachtree City, GA
FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-288-8077
JACK HACK HEADPHONE JACK AVIONICS TOOL
The “Jack Hack Avionics Tool” is used to prevent headphone jacks from spinning while you tighten the nut—conveniently without the need to reach behind the panel to hold the back side.
This a “must have” tool set for avionics and radio technicians. It has the potential to pay for itself on those jobs that you would otherwise spend half a day pulling the panel just to tighten the jack.
The Jack Hack includes two expanding post tools: one for standard 0.25 (¼ inch) diameter jack used for stereo GA headphones and one for the smaller (0.205 inch) jack used for the PTT connection.
- Set includes a wood block tool holder with a magnet and a 7/64 hex key.
- MADE IN THE USA.
- Material: 7075 Aluminum
- Finish: Conversion coating
- Tool label: permanent laser mark
- Customers Also Viewed
- Frequently Purchased With
Excellent tool. Would suggest changing to a ball end allen key to facilitate access when a 90 degree approach to the installed tool is obstructed.
July 28, 2020
Handy tool for tightening headphone and mic jacks without needing behind-panel access. Works with both 0.250 and 0.206 jacks. Handy storage block included.
July 15, 2020
I love this Jack Hack. Best little tool for my panel installation. Really saves on contortionist moves to get to the back of the panel to hold the jacks so I can tighten the jack nuts. This makes it soooooooo easy!
July 9, 2020
This is one of the coolest tools Iâ€™ve seen in a while, this tool can potentially save you hours of trying to reach the backside of a phone jack to tighten without twisting the wires off.
July 8, 2020
Q: Will the 0.250 (1/4) work on the Mono military style headset/helmet jack?
No. The 0.25 (1/4 inch) diameter tool is for GA stereo headphone.