SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM VIA UPS | 877-288-8077

Fuel Cap - Filler Neck

$21.95/Each
Quantity
Add to Wishlist
Part# 05-01060
MFR Model# FC2544

Overview

A variety of cap neck styles and materials accommodate oil, fuel, hydraulic or water applications. Accessory options let you build the filler assembly you need. Three different strainers (see Similar Items) provide varying degrees of filtration for 300 Series caps and necks to help you maintain clean fluids within your engine system. Special mountings match the type of connections you require.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What material is this filler neck made of?

The filler neck is cad plated steel.

Q: Does this fuel cap - filler neck, 05-01060, work with the aluminum filler neck flange you sell, 05-01056?

Yes, these two products will work together.

Q: Are these filler necks FAA Approved?

No, they are not FAA approved.

Q: What are the dimensions of the neck? Specifically, the height above the bead? Second question, is this neck weldable?

The unit is approx. 2.314" diameter, and from the rim to the top is approx. 0.638". The unit has threads to attach to a threaded ring which can be threaded to the tank.

Q: What is the measurement from the top at opening down to the threaded portion of the neck?

Approx 1 inch from the top of the neck to the start of the threads.