The KANNAD Company specializes in the design of positioning, measuring and data transmission systems for remote environments. The company relies on a name, KANNAD, which is well established within France and international markets, KANNAD is also well known for its COSPAS SARSAT distress beacon brand which has been manufactured for over 20 years.
KANNAD is one of the world leaders in the field of maritime, aeronautical and land-based distress beacons. Certified worldwide, TSO and JTSO, the Kannad ELT is easy to install wherever you operate and wherever the aircraft is flying during its life. The Kannad ELTs are OEM by a number of prime aircraft manufacturers of fixed or rotary wings and deliver value for the retrofit market by easy installation, easy programming and fleet management capability.
The KANNAD 406 AP is designed to be installed near the tail and to be connected to an outside antenna. A sophisticated “shock sensor” system will activate the ELT automatically in the event of a crash. When removed from the bracket and connected to the auxiliary antenna, the Kannad 406 AP becomes an autonomous survival beacon operating on 3 frequencies (121,5/243/406 MHz).
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The box includes the transmitter (including the battery) and the AUX Antenna ANT110 (TNC). You will need 11-06301 bracket, 11-06302 remote switch, 11-12892 whip antenna or 11-07995 rod antenna, 11-01802 x 2 BNC male, 11-09202 x 6 feet RG 400, 11-06580 x 30 feet 5 con wire AWG 22.