The KY 197A utilizes a space-saving flatpack design, allowing it to fit neatly into your Silver Crown stack. The unit measures a trim 1.3" x 6.3" and weighs just 2.8 pounds.The 14-volt KY-197A delivers 10 watts minimum transmit output power. This unit incorporates solid-state construction, with a digital frequency synthesizer generating all COMM frequencies. Despite its wide range of capabilities, the KY-197A was designed to be easy to read and logical to operate. For example, the active frequency is clearly distinguishable from the standby, with both displayed in separate, dedicated windows. This enables you to select the standby frequency while continuing to monitor the active frequency. After your frequency change is approved, one push of the transfer switch "flip-flops" the two frequencies.
The KY-197A features nine-pilot-programmable memory channels. Total frequency storage capacity is eleven, including those in "USE" and "STBY". This allows you to program in advance a string of often used frequencies. The memory channels and "USE" and "STBY" frequencies are held in nonvolatile storage. EEROM (Electrically Erasable Read Only Memory) devices are used so that no batteries or external power are required to "remember" stored frequencies through power interruptions or shutdowns. Easy-to-read gas-discharge displays clearly show all selections. The 118.00MHz to 136.975MHz range of the KY-197A provide 760 COMM frequencies. An audio leveling feature automatically amplifies weak audio signals and mutes strong signals. Must be installed by a King dealer.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
There are a number of suitable antennas for the KY-197A transceiver from a number of different manufacturers. A VHF Com antenna with a 118.00MHz to 136.975MHz range would be required.