TNC Right Angle connector
For RG142, RG400
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Item arrived in less than 24 hours after order. Aircraft Spruce is the best!
High quality connector. It would be nice if spec sheet was supplied. It was onerous to find data sheet from manufacturer.
Excellent option for tight spaces. Easy to crimp with standard BNC crimpers, though the pin is a very tight fit on the center conductor.
The spec sheet or amp assembly instruction would sure be nice, searching the web as the cutbacks are critical on these connectors... Thanks
I am sure a good connector, but, there is a need for some instructions for assembly and notes providing information on appropriate crimping tools. I am finding that every manufacturer seems to use different crimping tools especially for the center pin. The big avionics shops probably have the correct information and tools, but they probably are not buying from Spruce. More information including name of Mfr. would be helpful.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You can use this crimping tool 12-02378.
From the threaded base to the elbow, the measurement is 0.715". From the threaded base to the top of the plug is 1.218".
11-04450 is a TNC connector. 11-08415 is a BNC connector.