912 Oil Cooler Hose 12.5mm high heat hose for 912-914 oil coolers. Sold by the foot.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Sorry to say I havent reached the point of using it. It looks to be of excellent quality, as good or better than the hose I just removed as part of my condition inspection. Sorry not to be able to add more at this time.
13MM OIL HOSE
Exactly what I required. Always good service from ACS.
Replaced oil lines on Rotax 912.
Just the right size for the metric fittings found on Rotax engines.
Its a perfect hose and quick delivery. Wish the wall was bit more stiffer to ensure that it wont collapse at bends. Hope it gets harder over time.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The OD of this hose is approx 3/4 inch. The ID is 1/2 inch.
Maximum Working Pressure (psi): Up to 400
Yes this hose works for the suction and pressure lines on the rotax engine
The Penix fittins are not designed to be used with the rotax hose. They are all speced in SAE sizes as well, not metric.
This is a one fiber braid with an inner tube material of PKR.