Falcon Vacuum Directional Gyro

Add to Wishlist
Part# 10-22950
MFR Model# DG02V-3


The vertical rotating azimuth card is controlled by a precision gyroscope air-driven. The directional gyro will give correct heading information through ±60° of aircraft attitude in roll and pitch, 360° in yaw. A caging knob is provided to reset the gyro to the magnetic compass. Similar to Air Italia Gyros. Non-TSO’d - for Experimental Aircraft Only

Model: DG02V-3
Dimensions: 3-3/8" x 5-5/16"/134.95mm
Weight: 2.25lb/984g.

Made in China
California Prop 65 Warning Symbol

WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.



Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Will this Falcon directional gyro fit a 1970 Cessna 150K?

This gauge in not certified (TSO'd) and is for use in experimental aircraft only.

Q: Will this Falcon gyro fit in a 3 1/8" inch cutout?

Yes it is a 3-1/8" gauge.

Q: Will this Falcon gyro fit in a 3 1/8" inch cutout?

Yes it is a 3-1/8" gauge.