|The AHRS-1 for Experimental / LSA aircraft is a 2 1/4Ē sunlight readable color display instrument providing a display for an artificial horizon reference system (AHRS), an advanced digital compass, or both depending on which sensor packages are connected.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
This device would likely be pretty nice but it fits a 2 opening instead of 2 1/4. When it got here I discovered this when I tried to install it in my panel
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the install manual you will need the SP-7 (attitude sensor) and SP-6 (compass) units to drive the instruments for this gauge.
To be used as a compass with optional slip indicator, you would require the SP-6 Magnetometer, our Part# 11-09744. For the Horizon with slip, turn, & G-Force or Turn/Bank indication, you would require the SP-7, our part number 11-09743. The combined functionality would require both a SP-6 and a SP-7. These have now been added to the options selection on this unit.
The AHRS-1 comes with a connector to apply pwr/ground and wire in the CAN bus.
This is a 2-1/4 instrument.
You would need to add the SP-6.