Westach Cylinder Head Temperature CHT. Warns of overheating. Multiple switching available.
p/n 10-01235 Range: 100-700° F
p/n 10-00419: Cylinder Head Temp Gauge Range: 100F - 700F, requires J type thermocouple (not included).
p/n 10-01260 Range: 0 - 600° F
Made in USA
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
WESTACH 2-1/4" SQUARE CHT 100-650F 2A1 NON TSO
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The Westach Cylinder Head Temperature Gauge is for use with a 48" type J"712 series thermocouple.
Per Westach, the Cylinder Head Temperature CHT Gauge does not feature temperature compensation.
No, this gauge does not include the probe. Please see the type J Westach thermocouple senders.
You connect the two via the connector kit with the unit.
This instrument is self-powered and does not require an external power input.
For use with 48" type J 712 series thermocouple.
No, P/N 10-01235 is not back lit.
No, these gauges are not TSO approved and are intended for installation in experimental aircraft only.