Restoring your shimmy damper effectiveness
One of the most neglected components on Piper aircraft is the shimmy damper. The shimmy damper aids nose wheel steering by reducing the shimmy of the nose wheel during takeoff and landing, and during high-speed taxiing. Even minor shimmying can lead to serious damage to the nose gear and engine mount and affect the airworthiness of the aircraft. The shimmy damper is a sealed unit that, until now, could not be serviced and required costly replacement.
The STC and accompanying servicing kit allows your existing MAECO shimmy damper to be modified and serviced, restoring the shimmy damper to like-new condition and enabling it to perform as originally designed! The servicing kit installs in less than an hour by any A&P mechanic. Once modified, if the shimmy damper ever needs servicing again, the owner can service it with hydraulic fluid.
Our Shimmy Damper STC Kit is for the MAECO Shimmy Damper only and is non-refundable. Please check your shimmy damper for proper operation before ordering as there are many issues, other than a dry/empty shimmy damper, which can cause a shimmy in the nose gear. Please see the Piper MAECO Inspection Guide to help you determine if you need the servicing kit before ordering.
Supplemental Type Certificate SA10594SC
Replaces: 456-015, 21701-03, 21701-05, 87358-02, 87357-02, 456-017, 456-016
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Servicing kit includes: FAA authorization to modify present shimmy dampener, drill with stop special servicing screw which retains hydraulic fluid, instructions
The kit works with MAECO shimmy dampeners only. It will not work with the PS series.
Yes, it does.
No, the PA22 is not listed on the application guide.