|Mfg. Part No.||Description||Part Number|
|PTL-KT-69||TORQUE LINK KIT, PIPER, MAIN R||05-06632|
|Torque Link Repair Kits for Piper Aircraft. Solves many wheel shimmy problems. Save up to 60%.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
I was slightly disappointed. The kit I does not include the three required lock nuts. The McFarland web site ( where the kit originated from) shows the same kit cheaper and includes the lock nuts.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Please review the application guide PDF in the "Documents" tab. The aircraft models are listed in ascending order and the kit part number will be determined by the serial number of your aircraft.
You would need one kit per gear. One nose and two mains.
This includes the bolts, nuts, bushings, cotter pins, and washers to repair the torque link. These to not include tools.
This kit includes the following per the vendor: 3 Bolts BR 6 Bushings BR 3 Nuts BR 3 Washers