(U) All 1BX (Refer to Image #1)
Non-TSO'd Temperature Probes contain a thermistor for temperature sensing. 6" Lead Wires
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
I originally had a single wire oil temp sender that had some fluctuation. This 2 wire probe is solid as a rock with my Dynon EMS 120.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, these will work together.
Yes, this probe will have a 6" lead.
The length of P/N 10-00968 in 24 inches excluding the head.
The whole probe is 1.5 inches overall length. The tip length is 0.5