|KT 76A||28 Volt Converter Kit||11-00913|
|Installation kits and mounting trays by King Avionics|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
For the KT 76A & KT 76C install kit it comes with connector kit, pins and BNC output for a new installation.
11-00951 is the complete install kit for the KX 155/165 with glideslope. 11-00919 is the rack for the KX 155/165. You will need to order both if you want install kit and rack.
Yes, the KX 155 with GS install kit will work with the KX 165 with GS.
PN: 11-02079 is the KLN 89B install kit and that can be used to install a KLN 94.
The KMA 24 installation kit comes with the pins and connectors needed for the KMA 24.
Yes, the installation kit includes all pins and connectors needed to build the harness.
Part # 11-00912 is the tray only. It does not included the connector kit.
The installation kit comes with the connectors, pins, and hardware required for installation.
There is no back plate. It is a rack/tray and the install/connector kit.
The mounting tray and the installation kit are the two things you will need for the installation.