This durable, weather-resistant orange and yellow reflective cover for pitot tube, stands out in daylight or darkness under most weather conditions. Universal covers fit tubes from the smallest home built 1/4" tubes through 3/4" probes. The versatile hook/loop Velcro strap with sewn-in rubberized trim allows the cover to be quickly and securely fastened to the pitot tube.
Quality product. Fits perfectly and well made
PLANE SIGHTS UNIV PITOT TB COV
Good buy. Easy transaction, too.
Item fits fine on the Dynon AOA pitot tube.
Fits my Garmin Gap 26. Very tight fit, but fits! High viz
It fit very well on my Cessna 310 and sticks out well during the walk around.
Works great so far. The actual pitot cover portion is much longer than I need so there is a bunch so space at the front. However, I like the way the strap can really be tightened down to hold the cover in place. Thats the reason I got this one is because my last one didnt secure well around the top part of the pitot and the wind took it way. I dont think that will happen with this one.
Received and first impression looks great, unfortunately does not fit 7/8 probe like the overview states.
as long as it meets the drawing that was forwarded, the product will serve its intended application.
This pitot cover works great on a Cessna 180J as long as it is cinched up tightly. Once we learned to cinch it tightly, it has not come off despite some 40+ knot winds on the ramp. However, the strap with the velcro that wraps around the base of the pitot tube disintegrated after 10 months outside. The cover itself and the flag are still in perfect shape but are rather useless without the strap. Disappointed.
Did not as suggested fit the Diamond pitot tube on a DA-42. The sleeve is too short.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the Dynon pitot tube is 3/4" diameter. This will work on the Dynon pitot tube.
Yes, part # 13-05610 will work with the Garmin GAP 26.
Yes, this should work for that aircraft however since this does not have a specific application guide, we cannot guarantee it will work on every aircraft as some aircraft have undergone modification.