Kelly ignition harness incorporate a negative-pitch spring design (the tip of the coil spring extends inward) allowing the coil spring tip to lie flat against the spark plug electrode, providing 360 degreee contact. Kelly ignition harnesses are FAA/PMA approved for Lycoming, Continental and Franklin engines. |
![]() |
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
I installed these harnesses on both engines. They work well. If you are replacing custom cut harnesses, you may find (as I did) that some of the cables are shorter than the ones removed. This required some alternate routing.
KA12364 KELLY IGNITION HARNESS RED
One of the crimped ferrules had fallen off. QA needs reviewing.
KA12364 KELLY IGNITION HARNESS RED
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
That is a full set for both mags.
No, color is the only difference.