|Allows throttle cable to exit top at right angles. Cleans up the spaghetti associate with cable and choke cables. Includes adjuster sleeve and locknut. Requires different throttle cables because of extended length.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Not fully bent to 90 degrees so doesnt match original on other carb. Inside diameter of the cable side sleeve is too small, smaller than factory part. For the cost, this should be a better part.
It does change the angle at which it enters the carburetor but for the high price it should be coated with something on the inside.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.