This glare shield is designed for the Piper model PA28 and is made of FAA approved temperature stable Lexan covered with sound proofing foam and a non-glare vinyl that looks like leather. With a 3 inch eyebrow over the instrument panel, it not only adds beauty to your plane but also improves forward visibility. The Glareshield is easy to install and comes with all hardware and detailed instructions.
This late model PA-28 glare shield (PG-001L) has a distance between the defroster holes of approximately 22 3/4 inches from center to center and has the plastic manifold defroster application. The applicable models could include some PA-28 aircraft made 1974 and later, examples of PA-28-151, 161, 181, 236
Note: This WILL NOT fit late model PA-28 aircraft that have a hump in the middle and a third defroster installed. (Typically PA28-201)
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.