REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077

Jeffco Epoxy Laminating System

From $45.50 to $5677.00
Type Description Part Number Price Buy
Low Viscosity Laminating Resin1307 LV, Pail (40 lbs)
01-07917
$625.00
Quantity
Low Viscosity Laminating Resin1307 LV, Gallon (8 lbs)
01-07914
$124.95
Quantity
Low Viscosity Laminating Resin1307 LV, 55 Gallon
01-01059
$5677.00
Quantity
Fast Hardener3102, Pail (40 lbs)
01-07920
$625.00
Quantity
Fast Hardener3102, Gallon (8 lbs)
01-07918
$139.95
Quantity
Fast Hardener3102, Quart (2 lbs)
01-07915
$45.50
Quantity
Medium Hardener3176, Pail (40 lbs)
01-07921
$610.00
Quantity
Medium Hardener3176, Gallon (8 lbs)
01-07922
$135.95
Quantity
Medium Hardener3176, Quart (2 lbs)
01-07923
$46.25
Quantity
KitsJeffco Epoxy 1 Gal. Kit, Fast
01-07916
$172.95
Quantity
KitsJeffco Epoxy 5 Gal. Kit, Fast
01-07919
$814.00
Quantity
KitsJeffco Epoxy 1 Gal. Kit, Medium
01-07924
$163.95
Quantity
KitsJeffco Epoxy 5 Gal. Kit, Medium
01-07925
$795.00
Quantity
Subtotal $0.00
Add to Wishlist

Overview

1307 Low Viscosity Resin / H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener.

H-3176 30-minute Medium R/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.

   
California Prop 65 Warning Symbol

WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

use fast hardener, it works great and you get enough time for job(s). This resin mix has the advantage to be ok for sanding only one day after, still in curing process but easy to sand without clogging sanding paper or device. It was not the case years ago. To Brian J. comment : all adhesives and epoxies get out of control today :( To Claude P. comment : yes its true, years later same issue but its not last dispatching shipment trouble, I got well outside cardboad box but inside it, all 1Gal Rhino damaged, so this occurs before last packaging.

Chris.toscas
January 26, 2023

price is out of control.

Brian J Verified Purchase

RHINO 1 GAL KIT FAST

December 21, 2022

It works well for potting our product.

Dwight L
April 16, 2021

great stuff

Jerome D
September 8, 2020

The delivery to Malmö Sweden was very fast , ( 2 days!)thank you Aircraft Spruce and U. P. S. , than came the cov. 19 slow motion at the customs !!

Reiner R
July 15, 2020

Like using it

Jerome D
August 29, 2019

Very happy with this product

Jerry C
August 16, 2019

Nothing wrong with the product itself however, this is the second time in a row that I receive this kit with damage to the containers that occurs during shipping. I have informed customer service about shipping damage and it is still happening. I wish the packing department would consider how irresponsible shipping companies are with packages.

Claude P
October 25, 2018

Q&A

Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are the technical data sheets available for the Jeffco Epoxy Laminating System?

Yes, we have added the Tech Data Sheets to this web page under the "Documents" tab.

Q: What is the shelf life after the resin and the hardener are opened?

Per the supplier: As long as the lid stays on it and it is nice and tight, it should last about 1 year.

Q: Exactly how much resin and how much hardener is in the 5 gallon kit (01-07925)? Is 5 gallons the total of resin plus hardener? Or is it 5 gallons of resin plus 1.25 gallons of hardener (total of 6.25 gallons)?

This has 5 one gallon cans of resin and 1 gallon can & one quart can of hardener. When mixed, it should yield approx. 6.25 gallons of laminating material.