AeroShell Grease 7 is an advanced multi-purpose airframe grease, composed of a synthetic diester oil thickened with Microgel®, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistance to water.
The useful operating temperature range is –73°C to +149°C.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
AeroShell Grease 7 satisfies nearly all the airframe grease requirements of turbine engined aircraft and also those of piston engined aircraft provided that seal incompatibility does not occur. Most civil aircraft manufacturers approve AeroShell Grease 7 as a general purpose grease either by brand name or by specification. It is recommended for lubricating highly loaded gears, actuator screw mechanisms, etc., also for instrument and general airframe lubrication within the temperature range of –73°C to +149°C.AeroShell Grease 7 contains a synthetic ester oil and should not be used in contact with incompatible seal materials. Refer to the General Notes at the front of this section.AeroShell Grease 7 is a clay-based grease approved to MIL-PRF-23827C Type II; it should not be mixed with soap-based greases approved to MIL-PRF-23827C Type I.
Have not got it yet
AEROSHELL 7 GREASE 14OZ TUBE
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
There is a DOM printed on the tube usually near the barcode. The grease is good for 3 years from that date. Keep in mind, per Aeroshell, this grease does not expire in 3 years, but the manufacturer recommends a re-test from 3 years of manufacture date.
This is manufactured by Aeroshell.