ASL CamGuard is a comprehensive additive package formulated to supplement specific functions in a wide variety of motor oils. It was designed to dramatically improve the performance of all mineral based , semi-synthetic and fully synthetic motor oils in the areas of corrosion protection, wear reduction, and seal protection.
Camguard is an advanced oil supplement designed to give regular engine oil what it needs to protect and lubricate any engine. Camguard is a synergistic blend of advanced oil additives from all over the world, designed to reduce wear, curb deposit formation and more importantly protect engines against rust and corrosion. It contains multiple corrosion inhibitors for both ferrous and non-ferrous metals. A combination of ashless anti-wear compounds, anti-oxidants designed to reduce carbon deposits and special seal conditioners to prevent oil weeping. Camguard is FAA accepted and approved for use in piston engine aircraft oils meeting SAE-1899 standards. Camguard is compatible with piston aircraft oils, passenger car motor oils, most marine oils, and heavy-duty diesel oils.
Help extend the life of your engine with a product that has a cool name! Aircraft Spruce & Specialty Co. makes ordering easy with their great website.
Itâs what I wanted.
I always use CamGuard. Great product.
use this all the time.
Great service from Spruce. Been using this in a C182S for years now, Highly recommended.
One of the best aviation oil additives there is around. I use it in my aircraft and recommend it highly to my customers. This especially true during the winter months when many of the aircraft sit idle in their hangars.
Should be part of every oil change and any time oil is added between oil changes. Nothing is more important than keeping those moving parts well lubricated and protected.
OUTSTANDING SERVICE....AS ALWAYS!!
Iâm based out of the Houston area with my hangar less than 12 miles from the Gulf Coast. Since I started using CamGuard Aviation Oil Additive Iâve seen significant reductions in wear components in my oil analysis. Iâm convinced that CamGuard is helping to reduce corrosion and protect my engine. Gary VanDyke
got what i ordered and it came fast
Per the manufacturer, one pint of CamGuard will serve 8-10 quart sump for the change.
Per the supplier: The shelf life is indefinite.
Per the supplier: Yes. CamGuard is perfectly safe to use with 15W-50 oil.
The correct ratio is 1.6 oz of Camguard per quart. So for 12 quarts, you would need 19.2 oz.
It is recommended to add Camguard during each oil change. You would add 1.6 ounces of Camguard Aviation with each quart of makeup oil between oil changes.
Camguard is made NOT to be used during the break-in period of a new engine.
Yes, this can be used with 15W-50.
Yes, this is one of the preferred oils that Camguard recommends mixing this with.
Per Camguard: You would need to discuss this with the engine manufacturer or your A&P for this information.
Yes it is safe but it will not do any better with the camguard as the W100plus already has an additive IN it.