ALCOR BAYONET STYLE PROBE
GROUNDED, .24 OHM, TYPE J
* 28202 Adapter (4 ea.), ring terminals and hardware
** 28202 Adapter (6 ea.), ring terminals and hardware
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FIRST ONE VERY WELL, THE SECOND ONE, I DON´T KNOW...
86251 ALCOR CHT PROBE TYPE J
Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, Alcor probe 86251 will work with the Mitchell D1-211-5102 CHT Gauge.
Per the install manual the length of the cable is 15 inches.
K type is used for High temp application and J type is better for lower temp application: K= -326 to 2300 | J= 32 to 1382