All pilots know that running their engines at peak performance means maximum efficiency! Max. efficiency means substantial savings in fuel burned and engine maintenance. EDM 700 assures pilots of Peak Precision Engine Performance Simply and Economically.
EDM700 includes: Computer assisted diagnostics for troubleshooting the entire system, 2-1/4" panel mount, normalize mode, graphics resolution, automatically finds the first EGT to peak, display of Oil,OAT, IAT, CDT, volts, shock cooling of 2 TIT's, 1º temp. resolution, selectable ºC/ºF,all functions have Hi/Lo pilot programmable limits, supplied with JPI's well known, grounded, fast response probes,TSO quality, FAA TSO/STC approved, 3-yr warranty. All EGT probes, cht probes, harness, and hardware included. All EDM-700 systems come with data recording and provide long term trend monitoring to maintain ultimate engine health. Data Recording capability will records and stores all displayed parameters and, at a later time, transfer the info to a palmtop or laptop PC. Retrieve all the data stored in the EDM-700 or only the new data recorded since your last retrieval. In either case, no data is erased in the EDM unit.The data will be saved to a PC in a compressed format file. PC program supplied with the Data Recording Option will decompress the data for display and use by other programs, such as MS Excel or Lotus 123.
EDM-700 Data Recording contains a date and time clock. You may also program an aircraft ID, such as your aircraft registration number or your name that will appear in the output data file.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
An extremely quick shipping from Aircraft Spruce, US to Sweden. I’m very pleased with the product.
Everything I was wanting!! Proper shipping and delivery! Will be installed at annual and looking forward to have it in the cockpit!!!
Complete as ordered, good delivery time to Australia
I love my EDM 700! I get my GPS from my Garmin 496 handheld and once I got my K Factor dialed-in, my fuel flow is amazingly close for a carbureted C182. Once I got used to working the unit into my scan, I was glad I did not choose the color display because it fits in so well with all my other steam gauges.
...ma c'è anche questo...
Have had this instrument only 4 years when the display stopped working. Had to send back to the factory for $275 worth of repairs. JPI told me that is very common. I guess I will have to budget to repair this gauge every 4 years. Poor design/quality. I have other similar gauges that have worked properly for 15+ years.
I ordered with fuel flow and do not know the K factor so can’t set that up. I did not get the extra bayonet and my IA removed the EGT gauge now I have to reinstall. I am not sure the install instructions are adequate
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You will need to order the USB option for the EDM 700 or 800 first for this to work with a USB storage device but at this time PC only for interface.
Yes, JPI engine options can be added at any time after the EDM 700 is installed (not needed to be sent back to JPI).
Part Number 10-02012 does include 6 EGT and 6 CHT probes.
Because the EDM requires a special plug for the transducer, we do not recommend using the FT60 on an EDM 700.
The file is saved as a FAT 32 4GB memory stick. It can be saved as a CSV file after loading to the computer.
Yes, the EDM software is compatible with Windows 10.
When you add the main EDM 700 system to the cart, you will see an options window pop up and you can check the oil pressure option. The oil pressure option is part number 10-04183 and can also be added to your cart separately on the "Order By Part #" page.
Yes, however the probes are not included. Please see the accessories and options tab for more information.
It does not come standard with the unit. You have to have man, oat, rpm, and ff to get percentage of horsepower.
Per JPI the EDM 700 does not come with a tandem option, however the EDM 930 does have a two screen option.