1-877-288-8077 | firstname.lastname@example.org
Corona, CA | Peachtree City, GA
SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM VIA UPS | 877-288-8077
MATCO WHEEL AND BRAKE # W60
MFR Model# WHLW60
MATCO mfg produces a superior 6 inch wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses 1.25 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations).
The W60 is a 6 inch wheel with 4.375 inch width with an additional 1.23 inch caliper spacing. Bearing spacing is 2.5 inches and axle spacing is 1.25 inches. The total weight of this wheel and brake assembly is 7.1 pounds. The bearing axle diameter is 1.25 inches.
Performance The W60 is designed for the following standards:
Static Capacity: 1420 LBS
Load Limit: 4260 LBS
Maximum Accelerate/Stop Kinetic Energy: 189604 ft-lb
Torque Rating (@450 PSI): 1988 in-lb
Product Comparison Table
- Customers Also Viewed
- Frequently Purchased With
Q: Does the wheel W60 need a tube with a 90 degree or straight valve stem?
The NW60 needs a tube with a 90 degree bent stem.
Q: What is the correct replacement brake lining for this brake?
WHLM66-106 is the correct lining.