Pilotshop.com
- Shop All Categories
- Browse Headsets
Contact Us
Call Us
Sign In
- SHARE
Maule Anti-Shimmy Connector
MFR Model# 4001-29
Eligible for FREE Shipping
Overview
|
A high and low frequency spring is used to upset the natural frequency of the tailwheel. The lighter spring is used on the left side. |
 |
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
Reviews
Very good spring kit. Well constructed.
Verified Purchase
MAULE ANTI-SHIM COMP SPRING KIT 4001-29
Good buy and perfect fit.
Verified Purchase
MAULE ANTI-SHIM COMP SPRING KIT 4001-29
I had one of the small Tailwheel spring clips pull open on my Extra 300. This is the prefect replacement system with the oval clips with safety cotter pins.
Works great to stop the shimmy on the Scott 3200 tailwheel on my CUB
Could have been suppied with slightly longer pieces of chain, too short for my aircraft.
Was wanting to put these on a Taylorcraft with a maule tail wheel. The distance between the tail wheel an the rudder arm was to short.
One of the connecting links was not drilled to accept the cotter pin. I simply drilled it out to make it work but it is a pain to do.
This will only work I your chains are kept in constant tension.
Q&A
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer, everything in the kit is approved. However, it does not come with STC and a field approval may be required for installation in certified aircraft.
The springs are about 2.25 long and 1" in diameter. The connectors are 1-13/16 and the chain is 4" long.