Click here for more information
Note: STC is pending for use on US type certificated aircraft.
This part can be manufactured under contract with the owner operator under FAR 21.303b2. It is the owner operator's responsibility to determine airworthiness and applicability.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
(1-Inch Joggle on RH Side of Radio Stack)
Ours fit our 182G VERY well ... would certainly buy it again ... VAST improvement from the original
I was hoping previous reviewer had an unusually bad experience, but unfortunately I have to agree with him. Bought #74 for a 182 P. No it doesn’t fit at all. Yes trimming it is a pain but no matter how much trimming you do it will not make this part contour the top of your panel. Not sure what they based their mold on, or why this part can’t be shipped ready to install in the plane. I cut the front 70% of the glareshield off and threw it away. If you are looking at this, just use vinyl to cover the top of your dash. Do not waste your time on this.
This is not a complete or usable part. Do not buy this
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This light is produced with incandescent bulbs, not LED's.