Quick service and excellent product.
April 15, 2021
SCAT Tubing - As always, ACS delivers promptly to my doorstep!
March 24, 2021
What on earth is there to review? It is a two foot length of tubing shipped as I ordered it.
February 15, 2021
It work perfectly
January 14, 2021
It works well for the diesel heater on my boat.
December 22, 2020
using it for an exhaust extension for my generator and it seems to work great. Well see how long it lasts...
December 21, 2020
I give this product five stars for form fit and function. The coiled wire that gives the tube its structure is embedded in the wall of the material, not just free-floating in the ID of the tube.
Great product so far.
December 16, 2020
got it the next day, thanks.
September 24, 2020
I have not installed the ducting as yet.
The ducting looks like a perfect replacement for the worn original.
September 17, 2020
Excellent fit good service
September 7, 2020
Great quality product, shipped out the day after I placed the order. I was in need of flexible air duct tubing, not for an aircraft but a 50 yr old vintage car I was working on. The only place I could find the correct size I needed was through Aircraft Spruce Co. They had so many size choices in 1/4 inch increments I was amazed.
August 26, 2020
Good quality thanks
August 17, 2020
August 14, 2020
shipped promptly, undamaged, easy ordering. Thank you.
August 10, 2020
This time I used the 2ID -8 ducting. I purchased a nominal 3 ft length (quantity 1) to run from the heat muff to the defroster inlet of my Musketeer.
As I said in my 2018 review, while the ducting is single layer, the interior wire is embedded in the red stuff rather than just sitting on the interior surface as with the older materials. As such the wire is covered in the red material and does not tend to rust as in the past nor does the wire try to escape the interior.
One can still dislodge the wire without ripping the material when prepping the ends for attachment purposes.
July 31, 2020
Product arrived ahead of time and was exactly what was ordered.
Very happy with the service.
July 27, 2020
Seemed to me way better quality than the hoses that came in the kit of my home built, flexes very well.
July 10, 2020
Perfect fit in my 1983 Porsche 911 back dated heating system duct work.
Great color too!
July 7, 2020
June 24, 2020
Very nice ducting. Works well
June 12, 2020
Very pleased, the size I needed was in stock and arrived promptly.
May 31, 2020
May 28, 2020
Good quality hose worked as advertised.
May 10, 2020
Great high temp product. Used on my custom build Porsche 911 for heat exchanger ducting.
May 7, 2020
Processed and sent in a timely manner with the scat tubing packed so there was no damaged.
April 27, 2020
Excellent product. I am using it to replace the heater ducting on a 1987 Porsche. It is very high quality ducting, and easy to work with. An added benefit is that it comes with a clear plastic outer covering which protects and keeps the duct clean during installation... then the clear plastic can simply be removed. I also give top rating to the service and quick delivery from Aircraft Spruce. Thanks!
April 6, 2020
Good ducting for running from the baffling to the muffler on my C185
March 20, 2020
FAA quality! Fast shipping!
February 10, 2020
for replacement of frayed part should work fine
January 27, 2020
Quality material. The cut to length option makes it affordable for the owner of a single plane and it sure makes the engine compartment look nice when you have new scat tubing in there.
January 11, 2020
Quick service and shipping.
December 16, 2019
Delivery was timely, the quality of ducting is very good installation was easy due to cut to size.
November 14, 2019
October 12, 2019
Looks good but I ordered the wrong size so sent it back.
New 3 inch variety already installed and perfect .
October 10, 2019
Soft and flexible. Ducting like it should.
September 24, 2019
shipment was process immediately and received promptly! We only paid for UPS Ground however it was here the next day.. Great service!
June 14, 2019
I have had nothing but excellent service from Aircraft Spruce.
February 15, 2019
We get good quality parts from Aircraft Spruce every time.
February 11, 2019
Replaced my Ferrari brake ducts with this upgraded duct, higher spec material then OEM
February 9, 2019
Perfect for my aircraft preheater. Easy to order the correct size and length. Good quality and quick shipment.
February 1, 2019
Installed as a replacement for my avionics stack cooling. Performed as expected ... shipping was quick. Satisfied with my purchase.
January 26, 2019
Very High Quality.
December 25, 2018
A factory stick is 13 feet long and it is good that I did not try to save money and order less. I only had about six inches left over. I figured I needed about 11 ft as that is what I took out but routed the new SCAT a bit differently and less tight so ...
I used the -5 one and a quarter inch size for the vent ducting re my Musketeer.
Per a previous review, the steel wire is somehow internally covered as well and hence does not spring out at the end - much nicer than previous material I have used.
October 25, 2018
Shipping was incredibly fast! Product was exactly what I needed.
September 17, 2018
It has ben many years since I did business you guys. The service has not changes in all of these years. Great! When I needed this scat hose for the defroster on my 1938 Packard I saw Aircraft Spruce on the web and I knew exactly where to go. Keep up the good work.
September 14, 2018
Exactly what I ordered and needed. Great quality and fast shipping
June 21, 2018
Fit was great.
March 31, 2018
Packed great. Thick material.
November 12, 2017
Very easy to work with and flexible tubing for my hot air!
October 12, 2017
I used this for a high-performance car application, and it worked like a peach! I am thrilled with the result and the product itself - excellent!
October 6, 2017
This is an excellent product. Replacing heater hose on a vintage Porsche .Oem material on car was nowhere near the same quality
September 28, 2017
Great service... professional assistance..
September 14, 2017
Good quality. Arrived quickly.
September 8, 2017
August 13, 2017
Scat came cut to length with the rest of my order looks great thanks as always
April 7, 2017
Great product, came in good shape. Recommend.
April 6, 2017
great product. thanks
February 27, 2017
Good product consistent quality
February 20, 2017
The duct was satisfactory. Only minor complaint is that it was flattened in one spot when I received it.
April 27, 2021
B.O. was not very timely , everything was OK once received.
March 29, 2021
As ordered delivered as promised.
February 15, 2021
Thanks: Arrived intact, packaged well via USPS. However, I added a note to cut the two feet into three eight inch pieces. I received one piece 27 inches long and had to cut an eight inch piece. Therell be three inches wasted.
June 8, 2018
Used it for my 66 Mustang II rack and pinion frontend conversion disc brake cooling. Have the inlet behind the headlights into ABS tubing then clamp the flex duct to the ABS and snake SCAT ducting through the upper wish bone to the disc brake duct bracket and used another stainless steel worm clamp. The duct punctures too easy with a sharp object so I had to use chafe guards where it rubs against anything. Flexes very well steering L/R stop to stop. Ill take brake temp. readings to see if it is working.
May 10, 2018
Great to deal with quick delivery arrived packaged well, The only negative is the freight cost. Knowing its not in Aircraft Spruces control.
January 12, 2018
good quality. this duct has the metal embedded on the inside and outside with silicon which is nice because the metal wire inside does not shift. A very nice improvement over the older stuff. Not sure why there is white twine on the outside of the duct. That does not stay in place very well. But overall very satisfied.
May 30, 2017
Product received just as ordered after a lengthy backorder delay.
April 13, 2017
This tubings thread wrap is very loose. The scat I replaced had that thread glued down. Other than that, it is fine.
May 11, 2020
What can I say. Its tubing. I needed it to replace old tubing for the oil/air seprator. The problem was it was on back order for months. I probably should have cancelled the order and contacted another supplier that had it in stock. That is the only problems I have ever had with Spruce is the backorders take forever.
June 16, 2019
Ducting arrived after a somewhat slow shipping process (UPS Ground). The material is rather thin and tears easily, so I would not purchase this again. Im still looking for a compatible tape to reinforce the ends.
March 19, 2021
Duct appears to be of good quality, However the description of this isnt correct. The description states that the wire on the inside is visible. It is not visible but rather the wire is coated with the rubber material. This prevents me from pulling some wire out and cut it so that it makes an end without wire that can be clamped to the flange end on the vent.
March 20, 2020
This is not SCAT equivalent. The reinforcement string is not bonded in place as with real SCAT tubing, so when you cut the tube to length the string immediately unravels and begins to unwind from the tube. Also, the wire coil spacing is larger than real SCAT tubing. I do not recommend this stuff for aircraft.
August 12, 2020
Was damage in shipment because was packed in same box as oil. Cases of oil crushed some of this hose. Cannot believe the gasket was not damaged . Poor judgement by whoever is packing boxes
April 25, 2020