For reliability and durability reasons, E.I. will only manufacture ungrounded EGT probes. Ground noise at the engine can be a big problem for any piece of electronic equipment. Grounded probes transmit this noise back to the instrument. Grounded probes can also produce ground loops between the engine ground and the instrument ground. E.I.s ungrounded probes eliminate the problems associated with gound noise and ground loops, providing a stable display and fast system response time. An engine analyzer MUST be coupled with a well-designed EGT probe to achieve excellence in the total analyzer/probe system.
1/4” NPT with adjustable depth. (without cable)
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The EI probes include the probe and a short cable which would connect to OLC-1 connectors (included). Any additional wire is not included.
The range on this -80 to 1800 degrees.
Approx 0.08 lbs.
JPI recommends using JPI probes with the EDM series.
American National Standard Pipe Thread standards, often called national pipe thread (NPT) standards for short, are U.S. national technical standards for screw threads used on threaded pipes and pipe fittings.American National Standard Pipe Thread standards, often called national pipe thread (NPT) standards for short, are U.S. national technical standards for screw threads used on threaded pipes and pipe fittings.