REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077
Thumbs 1
Thumbs 1

SWIFT EGT CLAMP 20 TYPE PROBE 1/2" TIP 48"

$112.99/Each
Part# 10-02294
MFR Model# SK-C20-21
SizeDescriptionPart Number
CLAMP TYPE 1"-1-3/4"SWIFT EGT CLAMP 20 TYPE PROBE 1/2" TIP 48"10-02294

Overview

10-00488 EGT Sender 1"-2.5"
Clamp Type
"K" type sending unit with 4-ft. lead.

10-00489 EGT Sender 8x1.0mm
Screw-in Type
8mm threaded EGT Probe (N-RTX)

10-02294 EGT Sender 1" - 1-3/4"
Clamp Type
4 Feet Metal Shield Wire

Similar to Falcon Gauge
Made in China
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Very good product and shipping service!

Craig M
March 18, 2021

Seems nice and works with westech dual egt gauge on r582 cheaper than westech one. Time will tell on longevity.

Ben P
September 28, 2020

Ronald W
August 3, 2020

Got it quick. Works perfect. Thanks!

Paul J
July 13, 2020

The Swift Gauge probe worked very well and was easy to instal in my experimental home built airplane.

John F
June 19, 2020

easy to install and works very well. Fast shipping Thank you

Richard B
June 8, 2020

The jumper wire was also included, easy install.

Leonard L
April 11, 2020

Perfect, and fast delivery. Ordered 09-26, delivered 10-02. Does this 10-02294 SWIFT EGT sender is OK w Westach Dual EGT/CHT gauge (2DA1 10-01239) ? ...

Drieux G
October 7, 2019

The clamp type is slightly thicker than competitors, needs an imperial hole not a metric one! Lasts longer than others.

Alasdair S
May 16, 2019

Jens H
March 6, 2019

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is part # 10-02294 a type K thermocouple?

Part # 10-02294 is a Type K EGT Clamp Probe.

Q: Will EGT probe EP-001 part # 10-005488 be compatable with a 30yr old Alcor gauge in a 1980 Cessna 152?

As the Falcon EGT Probes are not TSO'd, they are not to be used in certified aircraft.

Q: What is the length of the probe EP-001?

4 ft lead.

Q: Is the probe Falcon EP-001 compatible with the WESTECH EGT that I have in my ultralight?

Each company only ensures compatibility with the manufacturer’s recommended probes. Since this has not been tested, this is not recommended combination.

Q: What is the temperature range of the probe EP-002?

The EP-002 has a temperature range of 400-1700 degrees Fahrenheit.

Q: What type extension cable is needed with p/n 10-00488 probe? type K or plain copper?

Type K wire is used for extending EGT leads.

Q: Are these probes grounded or ungrounded?

These probed are grounded.

Q: Will 10-02294 fit Rotax 582?

Yes, this probe can be used int he Rotax 582.

Q: Does the 10-02294 SWIFT EGT sender is OK w Westach Dual EGT/CHT gauge (2DA1 10-01239) ?

No, they are not compatible.

Q: Is the 10-00489 a type K probe?

Per the manufacturer this is type K.