|MGL FUEL PRESSURE SENDER 35 PSI||11-08068|
|7/35/100 PSI Fuel Pressure Senders (Fuel Injected/Carbureted Engines)|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
No problems so far.
MGL FUEL PRESS SENDER 35 PSI
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
PER UMA: INPUT VOLTAGE- 9-16VDC, 10mA. OUTPUT SIGNAL- 0.2v - 4.54vdc +/- 0.11vdc.
JPI recommends using JPI probes with their units.
No, these senders are not FAA TSO approved for certified aircraft. They are intended for use in experimental aircraft only.