A durable semi-gloss, 1-part, air drying flexible paint available in over 50 popular aircraft colors. Recommended as the standard finish for the Poly-Fiber cover process. Also may be used over suitably primed metal components of fabric covered aircraft. Fabric damage is more easily repaired when Poly-Tone finish is used. All pigments are non-bleeding or fading. Will not oxidize with age. Poly-Tone is always thinned 4 to 1with Poly Fiber Reducer (65-75 or 8500).
Note: All mixed paints are special order and are non-returnable.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Perfect as usual
POLY-TONE 170 BAHAMA BLUE QT
color was just what I expected and it turned out great! Easy to apply and dries in a short time. Sprayed in 75 degree weather and the shine is good.
POLY-TONE 170 BAHAMA BLUE QT
fast service paint matches can to can
can to can prefect match every time
great paint i have been using for years
Using polyfiber system on 1/4 scale Piper pa11 made from WagAero plans so easy to use from cloth to final coat
After nearly 4 years the color is an absolute perfect match.
As always, a perfect match in color and quality.
We have been using most every system available over the years, but keep returning to the Polyfibre line for its ease of application and longevity in the field. Highly recommend Polyfibre Products to anyone from the novice home builder to the professional.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
We can only provide Poly-Tone paint colors that are on the Poly-Fiber color chart. If you wish you need a custom color matched from a sample, you will need to go directly through Poly-Fiber. There website can be found at:
No. Poly-Tone is a vinyl based paint while aerothane is a polyurethane based paint. An example part number for Poly-Fiber aerothane paint would be 105-AQ-K.
No, Poly-Tone is designed to be used over Poly-Spray, which is a vinyl base material. Etching primers are used on metals, which a polyurethane top coat, like Aerothane is used.
Clear Poly-Tone is not available.
Poly Tone is a vinyl base paint designed to be used with other Poly Fiber fabric covering materials. It we not designed to be used on fiberglass parts. The two-part Aerothane or Mark II products are used for metal and fiberglass parts.
Dust free in 20 minutes. Allow 12 hours drying before using masking tape.All drying times are given at 70 degrees F and 50% humidity.
No, Poly Tone and Nitrate Dope are not compatible materials.
Poly Fiber only recommends spray application.