A durable semi-gloss, 1-part, air drying flexible paint available in over 50 popular aircraft colors. Recommended as the standard finish for the Poly-Fiber cover process. Also may be used over suitably primed metal components of fabric covered aircraft. Fabric damage is more easily repaired when Poly-Tone finish is used. All pigments are non-bleeding or fading. Will not oxidize with age. Poly-Tone is always thinned 4 to 1with Poly Fiber Reducer (65-75 or 8500).
Note: All mixed paints are special order and are non-returnable.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
fast service paint matches can to can
can to can prefect match every time
great paint i have been using for years
Using polyfiber system on 1/4 scale Piper pa11 made from WagAero plans so easy to use from cloth to final coat
After nearly 4 years the color is an absolute perfect match.
As always, a perfect match in color and quality.
We have been using most every system available over the years, but keep returning to the Polyfibre line for its ease of application and longevity in the field. Highly recommend Polyfibre Products to anyone from the novice home builder to the professional.
Just what I ordered.
Everything great. Only complaint? Previously I tried to buy MEK only to learn its crazy high price. (plus shipping of course) Months later I found Ace Hardware was again stocking it, but only in 5 gallon cans. No shipping to local stores made it, at $99.99 a good buy except that I dont need more than a gallon. I got a flying buddy to go halves with me. Now we bot have a years or more supply. Ive yet to learn why no retailers carry it. Only a substitute. Baloney! Even my congressmans office could not find out. Is it fear of lawyers, or some obscure and insane environmentalist law? Ditto for Plio Bond. Only green substitute at a higher price. I dont buy substitutes. I did find the real thing at another supplier---no problem. Turns out as Virginia goes Blue---following California and Oregon, its northern counties only join with the Northeast and a few other states in prohibiting it. I couldve asked further of Aircraft Spruce but I was too angry at you! The Aviation community must stop buying into the insane, global communist effort to strip us of our property and living rights under the guise of saving the planet! It is, next to the fake attempt to impeach Trump, an effort to turn us into another Venezuela or Cuba! Weve already cleaned up 90 percent of some of the admittedly wrong pollution of the planet. No, it is Earth that God gave us to subdue and develop for our use for our salvation. Of course we must care for it and not waste valuable resources. That is good stewardship. The best way of cleanup now is to dump half of government and its abusive rules and taxes that force us all to work harder to stay where we are. Forget about getting ahead! Dont forget inflation, the most abusive of our environment taxes. Keep up the good work, just fight back! Mike Smith Chase City
Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
We can only provide Poly-Tone paint colors that are on the Poly-Fiber color chart. If you wish you need a custom color matched from a sample, you will need to go directly through Poly-Fiber. There website can be found at:
No. Poly-Tone is a vinyl based paint while aerothane is a polyurethane based paint. An example part number for Poly-Fiber aerothane paint would be 105-AQ-K.
No, Poly-Tone is designed to be used over Poly-Spray, which is a vinyl base material. Etching primers are used on metals, which a polyurethane top coat, like Aerothane is used.
Clear Poly-Tone is not available.
Poly Tone is a vinyl base paint designed to be used with other Poly Fiber fabric covering materials. It we not designed to be used on fiberglass parts. The two-part Aerothane or Mark II products are used for metal and fiberglass parts.
Dust free in 20 minutes. Allow 12 hours drying before using masking tape.All drying times are given at 70 degrees F and 50% humidity.
No, Poly Tone and Nitrate Dope are not compatible materials.
Poly Fiber only recommends spray application.
Stits epoxy-varnish EV-400 for wood
Stits epoxy primer(green/white) EP-420/430