Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1

Aerocreeper - Adjustable Creeper

From $495.00 to $649.00
Description Part Number Price Buy
Aerocreeper - Standard - 3" Casters
Aerocreeper - Heavy Duty - 3" Front Locking Casters
Aerocreeper - Heavy Duty - 4" Front Locking Casters
Aerocreeper Deluxe - 3" Casters
Aerocreeper Deluxe - 4" Casters
Subtotal $0.00
Add to Wishlist


Caster options include:

  • Standard 3" x 1" Caster
    • Recommended for most uses on smooth cement floors
    • 120 lb dynamic load per caster
    • Keeps the creeper low for low working positions
    • Smooth operation
  • Heavy Duty polyurethane casters
    • More resistant to embedding metal chips and rivets
    • 250 lb dynamic load per caster
    • 1-3/16" wide tread helps rolling on rough surfaces
    • Available in 3 diameters
      • 3" - Usually the best choice - keeps creeper low for low work
      • 4" - better for rolling on rough surfaces but raises creeper 1-5/8" so it's not as good for low work
      • 5" - better for rolling on rough suraces but raises creeper 2-5/8" so it's not as good for low work
    • Locking Casters
      • Prevents rolling
      • Installed on front two casters


    • Multi-level creeper with 10 quick adjustable heights
    • Great for working under planes and other equipment
    • Heavy Duty
    • Holds over 350 lbs.
    • Made in the USA
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -


  • Multi-level creeper with 10 quick adjustable heights
  • Great for working under planes and other equipment
  • Heavy Duty
  • Holds over 350 lbs.
  • Made in the USA
  • California Proposition 65 Information: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.


  • Shipping Weight: 49 lb
  • Box Dimensions: 57" x 24" x 8"
  • Creeper Weight: 43 lb
  • Dimensions in lowest position: 53"x18-1/2"x5-1/4"
  • Seat height: 5-1/4" to 20-3/4"
  • Approximate shoulder height when on creeper: 5-1/4" to 40"
  • (The shoulder height dimension more accurately explains the range of work you can do with your hands. This allows you to comfortably work on surfaces up to 5 or 6 feet depending on how tall you are.)


If your deciding between the Aerocreeper and the EZ Creeper, Ill tell you what I found. Aerocreeper vs. EZ Creeper. I bought the EZ creeper, the shop I work in has 2 Aerocreepers..... The Aerocreeper is better than the EZ Creeper! The build quality of the Aerocreeper is far and above superior! The EZ Creeper has cheap casters, the welds are horrible and the thing leaks hydraulic fluid! The warranty for the EZ Creeper is also worthless because youll spend $300 in shipping to send it back to the guy who makes it in his garage. Whats that? Your EZ Creeper is only a year old and you just need the O-Rings to fix the system those leaks of Tractor Hydraulic Fluid (thats right he didnt even use 5606)? No problem - the guy will sell you a set for $37 plus shipping. I said - no thanks and went to my local hydraulic pats supplier who said the o-rings cost less than the sales receipt cost - so he gave them to me. The hydraulic pump and valve assembly on the EZ Creeper is horribly made and isnt even deburred. The Aerocreeper is smooth rolling, its strong as an ox and it works every single time! The EZ Creeper is so flimsy you cant push against it like pushing a landing gear into position - but you can with the Aerocreeper. Save your money and heartache and just go simple. Youll be happy you did. I pray that Spruce never sells the EZ Creeper - theyll get a ton of returns.

David A
April 11, 2021

Great product. Works as advertised. I use it all the time and find it to be the best creeper available. I highly recommend this product.

Steven B
February 24, 2019

This creeper is a lovely addition to the aircraft maintenance tools set. It will make working on the bottom of the wing etc. much nicer. As for the size of this creeper, Im 5-11 and the seat fits me fine. Like the other poster said it was too small for him at 6-2 so I may be near the edge of the back rest. (Something to consider) Now for my biggest gripe, I purchased the one with the articulating seat and with 4 casters. This thing weighs in around 50Lbs. I have to lift it into my Pick-up truck typically over the side. It is over 5.5 feet high and is a struggle to lift it out of the truck. I do believe the company is working on making this unit weigh less, so hopefully in the future it can come in at around 30Lbs. Also, as another reviewer mentioned, it would be beneficial to have the creeper lock down in place so as to not roll around when you are working. Something perhaps foot operated so that you could lock it and release it from the seat. (Just a thought). The height adjustment is very rough, and I find it needs to be finer at the lower settings. For those interested, I recorded the height of the seat and the backrest at each adjustment position. I recorded it here as Seat Height / Top of Backrest height (With the 4 casters) Starting with the bottom setting with it lying flat. 7 / 7 10 / 16 13.5 / 26 16 / 33 18 / 38 19 / 41 20 / 45 21 / 47 21.5 / 49.3 22 / 50.5 This is a very upright seating position. (Not sure that I need a Creeper to go this high.)

February 28, 2022

team to take images you

Saravanan E
May 17, 2018

Dont waste your money. I waited a long time to get one because of the cost. IT PLAIN SUCKS! I opted for the bigger casters. It rolls way to easy..when your trying tp wrench on something its like a rodeo to stay on the thing. Any debris in the floor will stop it in its tracks. Its not made for tall people. With my but on the seat, my head barely fits on it. Im 62. In my experience it is either too tall or too short. The height adjustment is not fine enough. It basically sits in the corner of the shop and Im back to rolling around on the floor. Huge waste of money

James G
August 18, 2021


Please note,'s personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the load capacity of the whole Aerocreeper? Bought similar designs but they failed fast. Was told I exceeded the max design load.

The creeper will support 350 lb with either the standard or the heavy duty casters. (The standard casters are rated at 120 lb each and the heavy duty casters are rated at 250 lb each so if the load is distributed over 3 or 4 casters, they should easily support 350 lb.)

Q: What is the length and width of the back rest cushion?

11.25" x 30.25".