ComfortMax™ Inflatable PFDs offer manual and automatic inflation systems, combining comfort with the convenience of instant CO2 inflation technology.
Revere’s ComfortMax™ series of inflatable life vests provide all the comfort and safety you need while looking smart wearing it. It’s so comfortable fitting, you’ll want to wear it all the time!
I havent used the vest and hope that I never will need to. I live in Southern California and frequently fly over the Pacific to Catalina or further up to the central coast. When over the water, we wear the vests as a matter of practice. The product seems well-made is comfortable, light and is ideal for a general aviation aircraft.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The only difference is the color. 13-04373 is red and 13-04372 is navy blue.
This flotation device uses CO2. It will inflate automatically once the rip cord is pulled.
This is a manual inflation system.
The jackets operate as a single chamber as are all USCG approved jackets, it is only when the PFD is SOLAS approved it has 2 chambers. There is no set frequency inspection period for the jackets as they can be serviced and tested by the individual.
This product is not FAA approved but it is USCG approved. It does not require it to be recertified or serviced but it is recommended to take a look on the back of the instruction manual on how to maintain this unit.
The 13-04373 is a manual inflated unit. It will not inflate until the cord is pulled.
Yes, they are yellow when inflated.
This is not FAA approved. It is not required to be recertified or serviced but recommended to be maintained by using the reference in the back of the instruction manual.
But the best rule of thumb to follow on the manual vests is….
*take the vest out at the beginning of each season
*inspect all the straps and bindings to make sure they have not been damaged or are fraying
*if there are any compromises to the materials and/or the straps the vest should be replaced
*remove the Co2 – inspect the seal -it should be intact.
*reinstall in the mechanism..you should see the cylinder seal indicator go from red to green.
* if you do not see green then the cylinder should be replaced.
*if the vest and Co2 passes visual inspection, inflate the yellow bladder with the
*allow to sit overnight – the bladder should stay inflated and NOT become soft *if the bladder loses air- the vest should be replaced
*if the bladder does not lose air, deflate via the oral valve (depress the spring at top of tube) repack via the instructions
You are ready to go.
This is located in the front on the bottom left next to the whistle. It is an orange tube.