Click here for more information
Note: Not FAA-PMA approved for US certified aircraft. May be manufactured under contract with owner-operator Under FAR 21.303b2. It is the owners responsbility to determine airworthiness and applicability.
|Part Number||Fits Models||Serial Numbers|
|170||Cessna 172 1956-1958|
|172||Cessna 172A through D, 1960-1963|
|172E||Cessna 172 - 1959 Only|
|172L||172 Type Certificate 3A12||All from 17251823 through 17276654|
|172L||Cessna 172F USAF T-41A||17276654 and up|
|172L||Cessna 172H USAF T-41A|
|172L||Type Certificate 3A17|
|172L||Cessna R172E USAF T-41B, C, D||R172-0001 - R172-0335|
|172L||Cessna 172F USAF T-41D||R172-0336- R172-0409|
|172L||Cessna R172G USAF T-41C, D||R1720410 to R1720444|
|172L||Cessna 172H USAF T-41D||R1720445 to R1720620|
|172L||Cessna R172K||R1722000 to R1723454|
|172L||Cessna 172RG||172RG0001 to 172RG1191,691 and up|
Warning this glareshield is nothing like the original in my 172M 66061. It is a piece of semi finished fibreglass that would need alot of cutting to size and modifying to get it to fit. Then it would need upholstering to get it looking semi decent. It was a waste of money and freight costs to get it to New Zealand just to throw out.
GLARESHIELD CESSNA 172L STC LTD 12V
Just to add to my previous review after consulting with Spruce they were gracious enough to issue me a full refund amount for this glare shield. Thank you.
Like the 1-piece design but a little short on the ends so it doesn’t tuck tight to the windshield or behind the sidewall panels like the OEM panel. It sits about an inch above it the sidewall. Good fit around the rest of the windshield otherwise so didn’t have to trim for a good fit, just cut holes for the defroster & compass bracket.
Couldnt be more disappointed. This is by far the worst fitting product Ive ever bought. I would suggest Aircraft Spruce stop distributing these. I recently bought one for an 80 172N. To say trimming was required is an understatement. There are essentially zero install instructions. We simply refused to install it. It wont fit properly at all and has zero flexibility, the front lip is showing fiberglass underneath it and is a really poor look, and it sticks out way too far, about 3-4 inches. Plus it will not fit the existing aluminum structure. We decided to apply vinyl for the glareshield and cover and stitch the existing eyebrow instead of installing this product.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These lights are standard white lights. They are separate from the glareshield and are removable. Yes, this product is STC'd.
No, the lights are incandescent.