Aircraft Type: Cessna 180
Fits Models:180A though H
Click here for more information
Note: STC is pending for use on US type certificated aircraft.
This part can be manufactured under contract with the owner operator under FAR 21.303b2. It is the owner operator's responsibility to determine airworthiness and applicability.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
This glareshield doesn't work with a float plane V brace in a 180 so I didn't install it. It also doesnt work with the stock glareshield hand holds. It seems to be of reasonable quality otherwise. It would probably work well in a 182.
Did not fit for our Cessna 180H. Was too small, and left large gaps on the sides and at the top of the instrument panel.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The lights are white colored and they can be dimmed.
Yes, you may need to trim and gently bend the glareshield to install but you would not need to remove the windshield.