|Extruded silicone hose specially recommended for engine cooling and heating system applications.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
|Physical Tests||Method||SAE |
|Cold Flexibility |
|SAE J20 (5.1.2)||Not Fracture, not show |
any cracks or breaks
|Ozone Test |
|ASTM D-1149||Not show any cracks||Pass|
|Kink Test (%)||SAE J20 (5.1.4)||Collapse allowed 25%||<9|
Perfect Fit and solved my problem at 1/3 the price of other supplier
SILICONE HOSE 5/8 I.D BLUE
SILICONE HOSE 1/4 I.D. BLUE
Very high quality material and finishing.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, these are for experimental aircraft applications only.
Per the supplier: Yes, it will work just fine.
Per the supplier: -50 inches vac / 350 temp / 100 psi. It is the same hose Rapco uses.
This hose is not recommended for fuel or oil.